|
It is currently Mon Nov 25, 2024 2:50 am |
|
All times are UTC - 5 hours [ DST ] |
|
Page 1 of 2 |
[ 34 posts ] | Go to page 1, 2 Next |
| Print view | Previous topic | Next topic |
NEW ROTAX 915
| Author | Message | ||
|---|---|---|---|
 Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times 
|
You do not have the required permissions to view the files attached to this post. _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 12:43 pm |
|
||
|
|||
|
|
Looks sweet; you know it's going to be pricey.
|
||
| Wed Dec 02, 2015 12:49 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
The 914 is around $30k so 18% more power should cost 18% more.....$35,400 would be my guess...
unless rotax just rounds up to $40k to keep the numbers nice and even.... _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 2:54 pm |
|
||
|
|||
|
Site Admin 
|
_________________  A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Wed Dec 02, 2015 3:02 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
I like the D-motor very much, I really like it in the Niki lightning!
You do not have the required permissions to view the files attached to this post. _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 3:17 pm |
|
||
|
|||
|
Site Admin
|
They have been running the 4 cylinder ones in helicopters (major major test!!!) and they are performing flawless.
35 moving parts! 4 grand overhaul 2000 hours TBO. And they make them the very airport we hangar at!!!! _________________ A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Wed Dec 02, 2015 4:30 pm |
|
||
|
|||
|
Site Admin  Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
I wonder if the 915 is still using a 2 stroke crank?
     _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Wed Dec 02, 2015 4:39 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
The Flathead design is great for a low RPM engine, it eliminates lots of complication and weight too.And makes a smaller package. I love it.
_________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 4:40 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
Back in the old days you could buy surplus military drone engines...ala, the Mac...
but now some of the military drones use rotax 914's, but they are destroyed and not surplussed.. too bad 4 us.. You do not have the required permissions to view the files attached to this post. _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 4:43 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
MadMuz wrote: I wonder if the 915 is still using a 2 stroke crank? I don't see why they would change, especially since they are dry sump, the roller bearings can live with less oil, but rotax never built anything to be cheap and/or easy to maintain. Harleys still use roller crank bearings. _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 4:45 pm |
|
||
|
|||
|
Site Admin
|
Plus valves sticking event is a none event. Overhead valve will cost a lotta dough!!!!
_________________ A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Wed Dec 02, 2015 4:51 pm |
|
||
|
|||
|
Site Admin Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
elwood wrote: MadMuz wrote: I wonder if the 915 is still using a 2 stroke crank? I don't see why they would change, especially since they are dry sump, the roller bearings can live with less oil, but rotax never built anything to be cheap and/or easy to maintain. Harleys still use roller crank bearings. The reason I would like to see them change is because to change the bearings you have to press apart the crank.... and that cranks can 'wander' a bit and get out of line. As you know, some folks weld their cranks... but this means you can never rebearing that crank again.... Harleys only have one pin, so new bearings can be fitted  Have I told you lately that    _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Wed Dec 02, 2015 4:53 pm |
|
||
|
|||
|
Site Admin
|
I missed the
_________________ A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Wed Dec 02, 2015 4:56 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
Ok well here!
You do not have the required permissions to view the files attached to this post. _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 4:59 pm |
|
||
|
|||
|
Site Admin Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
Speaking of douchbags.... where is Jon these days?
And, if you are there Jon.... _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Wed Dec 02, 2015 5:05 pm |
|
||
|
|||
|
Site Admin
|
Besides on the D-motor there is no turbo charger!!!!!
135hp normally aspirated. I am not big fan of turbo chargers on aviation engines......  _________________ A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Wed Dec 02, 2015 5:30 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
The D motor is bad ass, probably sounds like an old ford hot rod.
_________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Wed Dec 02, 2015 7:32 pm |
|
||
|
|||
|
|
If a pressed crank goes out of whack, it can be trued again. It's often the final step when pressing them back together. Final adjustment is made with a lead hammer.
|
||
| Thu Dec 03, 2015 10:00 am |
|
||
|
|||
|
Site Admin Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
That is true Dinoa, but my point is, that if the crank moves and you don't know it, it flogs everything else inside the engine out. That is why the 9 series had so much starting issues and when they weren't starting properly and were running backwards, it would twist the crank.... even a backfire on cranking.... or running backwards on shut down may twist the crank (or damage the gearbox).... so to me, if you are paying the same amount of money for a bare motor for a hobby/sport like a gyro motor at $30K when you could buy a new car for that.... the motors need to be at least a little more resilient than a pressed crank from a 2 stroke. Even if the crank pins were splined and press fitted.... or press fitted with a keyway to keep them straight would be a help.... but I have seen a 582 crank getting pressed straight.... pretty stone age really
I just think that the amount of cash the motors cost... you should be at least a little confident it will reach TBO without worrying if it backfires while starting or runs backwards etc Just my opinion  So nobody become an  and y'all (especially that dang Lofty) _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Thu Dec 03, 2015 10:53 am |
|
||
|
|||
|
Joined: Tue Nov 05, 2013 9:24 pm Posts: 2747 Location: East Central South Carolina Has thanked: 521 times Been thanked: 2905 times
|
I sure would like to see the rudder control mechanism diagram of this.
Attachment: niki.jpg You do not have the required permissions to view the files attached to this post. _________________ ===RayNAiken=== |
||
| Thu Dec 03, 2015 1:25 pm |
|
||
|
|||
|
|
Page 1 of 2 |
[ 34 posts ] | Go to page 1, 2 Next |
|
All times are UTC - 5 hours [ DST ] |
Who is online |
Users browsing this forum: Henry Bowman and 1013 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |