Author |
Message |
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
I have never seen a Bensen Days like this one. There was NOT one gyro sold. None. People don't have money I guess. Stan from Georgia was seriously looking and wanting mine. But he just bought a Corvette and had no desire to tell Fran his wife that he wants a gyro too... LOL
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 11:55 am |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
I am seriously thinking of selling the blades, prop, head engine and stick a 912 on it and keep her. I will need to go to 26 footer and my all up will be over 750 so I need a head with two bearings.
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 11:57 am |
|
|
MadMuz
Site Admin
Joined: Tue Sep 02, 2014 7:45 am Posts: 10122 Location: Poona, Qld, OZZY
Has thanked: 21848 times
Been thanked: 6197 times
|
Gabor wrote: I am seriously thinking of selling the blades, prop, head engine and stick a 912 on it and keep her. I will need to go to 26 footer and my all up will be over 750 so I need a head with two bearings. What size rotors are on it now? Why not just buy a couple more prop blades or another prop and enjoy it as it is? Are you not keen on 2 strokes? Even with a 912, you don't need huge rotors? All our old school 2 seaters only had single bearing heads.... unless you were going to crank and bank it seriously hard, single would be fine I reckon.... What rpm are your rotors running at now with full fuel and you in the chair ?
_________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..
If electricity comes from ELECTRONS, then surely morality comes from MORONS??
|
Thu Apr 23, 2015 12:07 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
The straight and level is in the 380s I do not trust the 582 for the kind of flying we are doing here. Well I have a 2 bladed hub. So I will need a new hub and such. Might as well get a new set that is "far superior" to the rest I have 25 footers on and my All Weight Up is 720 right now. The 912 will put me into the 760-770 lbs range. I will feel better if I have a double row bearing above me. It's not always about the need it's about the want!
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 12:16 pm |
|
|
elwood
Joined: Wed Nov 06, 2013 5:21 am Posts: 7144 Location: Lost
Has thanked: 115 times
Been thanked: 8610 times
|
Dont get a new head, maybe Jake could build you a double bearing block, or I MIGHT know someone that has a spare.......... You would then just need taller towers. Save $$$$$$$$$ That guy in the orange machine has a spare 912 prop, just sayin, The behemoth would be really sweet with a 912. ROTAX 912 ULS 100HP TTSN 68HRS • $10,000 • AVAILABLE FOR SALE • S#5650406 - Newer Crank Case per SB912_029_UL Crank Tested/Pass No Distortion SOLD AS IS w Logbook • Contact Berj Karachorlu - LIGHT SPORT AEROMOTIVE, INC., Owner - located Sugar Grove Aurora ARR , IL USA • Telephone: 3126990892 • Posted April 9, 2015 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad Just keep that car for a few more years........
_________________ It's never too late to be a bad example.
I spent all my money on Bikes, Broads, and Booze, the rest I wasted.
|
Thu Apr 23, 2015 12:45 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
Not only him but our hangar mate Larry too.....guess what the tractor is gonna swing So you know a guy huh? Well Mr.Jake said he would build one for me of course....but that was for the tractor too.... LOL
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 12:48 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
10 grand is a bit deep. I have seen them running for about 5-6 and lockwood rebuilds them for around 1800 bux. You never know what you get when it is without logbook and such. I also have to sell my shit first. :( Not that wealthy.... but I am working hard!!!
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 12:51 pm |
|
|
elwood
Joined: Wed Nov 06, 2013 5:21 am Posts: 7144 Location: Lost
Has thanked: 115 times
Been thanked: 8610 times
|
The problem was Tommy May said he was going to buy the behemoth and backed out, then he said He was going to buy dave Hopkins Dominator, and backed out, then he said he was going to buy Davey Seace's 2 place dominator and backed out......That guy is a real piece of work let me tell you...He wanted me to do an annual on his machine 2 years ago and backed out.....If Tommy may says he is going to do something it is BS.....
But i am surprised that no one bought anything...I was trying to get Phil to buy the aircommand all it needed was an engine, rotorhead and blades... but no luck.
_________________ It's never too late to be a bad example.
I spent all my money on Bikes, Broads, and Booze, the rest I wasted.
|
Thu Apr 23, 2015 1:22 pm |
|
|
elwood
Joined: Wed Nov 06, 2013 5:21 am Posts: 7144 Location: Lost
Has thanked: 115 times
Been thanked: 8610 times
|
Gabor wrote: Not only him but our hangar mate Larry too.....guess what the tractor is gonna swing So you know a guy huh? Well Mr.Jake said he would build one for me of course....but that was for the tractor too.... LOL One of those props wont work on the tractor if it is counter rotating, so there you will have a spare for the behemoth,
_________________ It's never too late to be a bad example.
I spent all my money on Bikes, Broads, and Booze, the rest I wasted.
|
Thu Apr 23, 2015 1:25 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
elwood wrote: The problem was Tommy May said he was going to buy the behemoth and backed out, then he said He was going to buy dave Hopkins Dominator, and backed out, then he said he was going to buy Davey Seace's 2 place dominator and backed out......That guy is a real piece of work let me tell you...He wanted me to do an annual on his machine 2 years ago and backed out.....If Tommy may says he is going to do something it is BS.....
But i am surprised that no one bought anything...I was trying to get Phil to buy the aircommand all it needed was an engine, rotorhead and blades... but no luck. The real shitty thing is that he wrote me that he was committing to buy the machine and I pulled the ad. I have sent a guy to the aircommand ad for 18.5 and he bought it. There went my sure buyer. He apparently also fucked over the guy who bought his RAF (I talked to him) and the guy who bought his Aircommand (I have heard how fucked up that machine was). Nice guy huh? People are people I guess. Next time 5 grand deposit non refundable. Live and learn
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 1:41 pm |
|
|
Hellified
Joined: Tue Dec 10, 2013 3:55 pm Posts: 4163
Has thanked: 125 times
Been thanked: 5440 times
|
Gabor- When I sold my Helicycle....the first time...I insisted on a non refundable deposit. He agreed to my price...and kept saying his word was his bond. Right then and there was a red flag. I have learned from dealing with people all my life that when they emphasize "my word is my bond".....watch out! ..I took my ad down . He calls a few days later and said his wife stopped the sale....so no deposit was sent. So I readvertised it...and the guy calls again a few days later wanting it again... I told him I must have a substantial deposit now. He sent it....then another week he calls again with another excuse for backing out of the sale again. Now if his excuse was a sudden health issue...death in the family...or such...I would have sent the non refundable deposit back to him....but he is a grown man giving childish excuses and committing to sending a non- refundable deposit to me.
I kept the deposit and sold my Helicycle to another person.
I just don't understand how people undermine a very precious thing they could have.....their integrity.
|
Thu Apr 23, 2015 2:29 pm |
|
|
rcflier
Joined: Fri Jan 23, 2015 8:01 am Posts: 291 Location: Middle of the Baltic Sea (Denmark)
Has thanked: 263 times
Been thanked: 328 times
|
Gab, keeping the Behemoth with a 912 is a great idea. It looks like such a great flying gyro, and with a 912 you'll trust it a lot more. But should it be UL or ULS? I'm looking for a 912 UL myself, but every ad I've seen in UK or Germany with an affordable 912 is a scam! (or even a 582) So far I'm stuck with my 503. And I'm beginning to think of losing weight, so I can use it. (not that I weigh that much, but less is better. As long as I don't go below 550 lbs AUW for my 23' Skywheels) Cheers Erik
_________________ Paused building - bought a "flying GoldWing" to learn on
|
Thu Apr 23, 2015 5:27 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
Erik to me 80 hp is plenty. I just want the 4 stroke behind me. Th e 582 is plenty power. But l want to have a 912. Simply wanting it
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 5:43 pm |
|
|
ARFLYBOY
Joined: Tue Nov 05, 2013 11:00 pm Posts: 448 Location: Mt Vernon AR
Has thanked: 60 times
Been thanked: 589 times
|
Gabor wrote: Erik to me 80 hp is plenty. I just want the 4 stroke behind me. Th e 582 is plenty power. But l want to have a 912. Simply wanting it Gabor my brother, why don’t you just put a Yamaha 120 in it for about 1/10 the cost of a 912, and be done with it. Reliability of a good four stroke goes way beyond any of the two strokes. Great picture and video from you all, Thanks for all the great posts.
|
Thu Apr 23, 2015 10:41 pm |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
I guess I could do that. I just need to figure out the complete setup. Clutch and c box and having the connecting plate and such. I am not even sure if Racer is still making them or not??? The 912 is just a swap and that's why I was leaning in that direction.
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Thu Apr 23, 2015 11:27 pm |
|
|
ARFLYBOY
Joined: Tue Nov 05, 2013 11:00 pm Posts: 448 Location: Mt Vernon AR
Has thanked: 60 times
Been thanked: 589 times
|
Gabor wrote: I guess I could do that. I just need to figure out the complete setup. Clutch and c box and having the connecting plate and such. I am not even sure if Racer is still making them or not??? The 912 is just a swap and that's why I was leaning in that direction. I’m not sure what Todd is doing since he has lost Mark. I had talked to him a month or so before that happened and he wanted me to machine him some more clutches for him. Since that happened I haven’t talked to him, I guess in a way that’s kind of shame on me for not reaching out for him. I know Glen K bought the last kit from him and he’s very close to having it flying now. Hopefully Todd’s doing good and maybe we will all here from him soon.
|
Fri Apr 24, 2015 12:24 am |
|
|
MadMuz
Site Admin
Joined: Tue Sep 02, 2014 7:45 am Posts: 10122 Location: Poona, Qld, OZZY
Has thanked: 21848 times
Been thanked: 6197 times
|
ARFLYBOY wrote: I guess in a way that’s kind of shame on me for not reaching out for him. I know Glen K bought the last kit from him and he’s very close to having it flying now. Hopefully Todd’s doing good and maybe we will all here from him soon.
Its never too late to reach out John.... although, the longer you wait, the harder it becomes...just sayin'
_________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..
If electricity comes from ELECTRONS, then surely morality comes from MORONS??
|
Fri Apr 24, 2015 12:30 am |
|
|
ARFLYBOY
Joined: Tue Nov 05, 2013 11:00 pm Posts: 448 Location: Mt Vernon AR
Has thanked: 60 times
Been thanked: 589 times
|
MadMuz wrote: ARFLYBOY wrote: I guess in a way that’s kind of shame on me for not reaching out for him. I know Glen K bought the last kit from him and he’s very close to having it flying now. Hopefully Todd’s doing good and maybe we will all here from him soon.
Its never too late to reach out John.... although, the longer you wait, the harder it becomes...just sayin' Very true Muz!! I guess I need to check in with Todd, and see how he's doing...
|
Fri Apr 24, 2015 12:48 am |
|
|
MadMuz
Site Admin
Joined: Tue Sep 02, 2014 7:45 am Posts: 10122 Location: Poona, Qld, OZZY
Has thanked: 21848 times
Been thanked: 6197 times
|
_________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..
If electricity comes from ELECTRONS, then surely morality comes from MORONS??
|
Fri Apr 24, 2015 2:07 am |
|
|
elwood
Joined: Wed Nov 06, 2013 5:21 am Posts: 7144 Location: Lost
Has thanked: 115 times
Been thanked: 8610 times
|
_________________ It's never too late to be a bad example.
I spent all my money on Bikes, Broads, and Booze, the rest I wasted.
|
Fri Apr 24, 2015 8:05 am |
|
|
Who is online |
Users browsing this forum: No registered users and 125 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|