Author |
Message |
Freebird
Joined: Fri Jun 27, 2014 2:24 pm Posts: 115 Location: Zephyrhills
Has thanked: 17 times
Been thanked: 155 times
|
When I started flying with a 72 HP Mac in 1973, if you could fly from one end of the runway to the other before the engine quit, you called it a successful day. Later, when engine reliabilty improved, we had to learn how to land with power. To this day, I always land with the engine idling. The thought of having to land with power, scares the hell out of me.
|
Fri Nov 06, 2015 7:04 pm |
|
|
Hellified
Joined: Tue Dec 10, 2013 3:55 pm Posts: 4163
Has thanked: 125 times
Been thanked: 5440 times
|
I don't understand a lot of new gyro pilots landing at way too fast of speed..Good golly...I taught myself to land at idle, to do a lot of what Jake said....always assuming that engine was going to quit.....and my engines have quit 18 times in my gyros and twice in my helicopter. Never a scratch to myself or my machines.
Had I been trained to land much faster than I should. ...I have often wondered how many machines I would have torn up in my 20 forced landings.
|
Fri Nov 06, 2015 8:51 pm |
|
|
elwood
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost
Has thanked: 115 times
Been thanked: 8645 times
|
We have brought that up before about the new crop of gyros and CFI's not training for emergency situations etc. plus all the new Eurogyros have linked steering and no tail wheels.......Just sayin'.
_________________ It's never too late to be a bad example.
I spent all my money on Bikes, Broads, and Booze, the rest I wasted.
|
Fri Nov 06, 2015 9:00 pm |
|
|
Flying Wolverine
|
Greg always made me come in for landing at idle so every landing was like an engine out. I wouldn't know how to do it any other way and only used power to adjust a botched setup just before a landing which saved my caboose more then once and Greg's dominator from tipping over or screeching sideways. Good to hear he got that right from what I am reading here!! He is also going to transition me to my single place cuz he said a two place is way slower on the controls then a quickie single place.
Last edited by Flying Wolverine on Sat Nov 07, 2015 11:47 am, edited 1 time in total.
|
Sat Nov 07, 2015 12:41 am |
|
|
MadMuz
Site Admin
Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY
Has thanked: 21874 times
Been thanked: 6221 times
|
Yeah, that nudie girl pilot landed a Calidus at 45 kts in one video I would sum it up by saying that many clones are copied from one and another, often they were copied by people who really didn't understand gyros in the first place... just did what the other company had done and are easy to make/copy.... then realised that the weight of the thing they have built flies differently to a lighter machine .... so then they copied each others manuals which were written to cover their asses when folks kill themselves in them.... Also, people these days seem to want to be seen as 'real pilots' so they have to have every instrument a 747 has... definitely more instruments and gadgets than any shit cesna or whatever.... not realising all the extra weight of the toys make it have to be flown more and more like a spam can Then everyone wonders why their machine tipped over and self destructs.... and they have to come up with the old "a gust of wind must have got me" line.... to make themselves feel better I would not be surprised if some manufacturers couldn't actually explain HOW their machine flies, they can parrot off what they have learned from the others manuals.... but I doubt that they really know the real details of why and how There will be exceptions of course, that do have a good grasp on the nitty gritty of how a gyro flies, but I think that would be a minority.... most manufacturers would just say "ours simply fly better than all of the others" ..... but any manual that says a gyro that lands at any more than walking pace then doesn't stop before taxying on a full stop landing (not a touch and go) and especially before turning to exit runway.... obviously doesn't know how a gyro works IMO... I reckon, if some of them flew an open frame, agile machine.... you would never get the smile off their faces .... if they did fly a lighter, open machine, they may even realise what they are missing out on
_________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..
If electricity comes from ELECTRONS, then surely morality comes from MORONS??
|
Sat Nov 07, 2015 8:46 am |
|
|
Gabor
Site Admin
Joined: Sat Nov 02, 2013 2:18 pm Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
|
I used that "a gust of wind must have got me" line when I wheelied Lofty's MTO..... He believed me....or was too scared to say anything. My first words were. "shut up....it's a payback" Did I scare you? He replied: "Well......I was concerned a little" WHat a great guy?!!!!!!!!!!!!!
_________________A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.
|
Sat Nov 07, 2015 9:01 am |
|
|
Flying Wolverine
|
|
Sat Nov 07, 2015 11:51 am |
|
|
Always Gone
Joined: Tue Nov 12, 2013 8:52 pm Posts: 286 Location: Tomball Texas
Has thanked: 93 times
Been thanked: 460 times
|
Landing at flight idle or landing with power now that is interesting. If you have not used or been taught both I feel for you . There is a very good reason to when needed to land with some power. In gusty or high wind especially cross it greatly improves directional control. Unlike what some people will tell you it is not always possible to land into the wind. An example is a runway cut out of trees or a canal road and many other kinds. I have landed with 30 Kts direct cross with no problem but it had to have power to give rudder authority. I have always taught by procedure for the conditions at hand. Now let's talk students. There are those who listen and those who do not. There are some who want you to teach them there way? As if they know how to fly already. Then there are some that refuse to be trained and or think they can finish on there own. These kind some times think there buddy can fill the gaps the CFI did not get to. Then still more that do not do as the CFI suggests and fly with a transitional CFI or other needed advice. That being said I have also seen many students that have been signed off that lacked the basic skills. Then there are CFIs that try to unlearn exceptional skills that qualified CFIs teach. Believe it or not things like ground rotor handling.
|
Sat Nov 07, 2015 4:31 pm |
|
|
Hellified
Joined: Tue Dec 10, 2013 3:55 pm Posts: 4163
Has thanked: 125 times
Been thanked: 5440 times
|
Jake- Exactly! My 20 engine outs had no power available clear to the ground.
|
Sat Nov 07, 2015 7:33 pm |
|
|
Always Gone
Joined: Tue Nov 12, 2013 8:52 pm Posts: 286 Location: Tomball Texas
Has thanked: 93 times
Been thanked: 460 times
|
Of course without. I never solo anyone that I do not spend many hours of time cutting to idle at all kinds of places in all conditions. I was just pointing out that the student needs every procedure taught not just flight idle landings. I have seen many signed off that do not know the diffrence between short field soft field crosswind or rapid rate of decent. Remember just because a student has some training from several CFIs with no sign off does not mean that they were proficient to fly or teach themselves. If so they would have a solo sign off. There is more to it and unfortunately this happens because of things like this. So part responsibility has to be placed on the pilot for taking life into there own hands if they fail to get what is needed to fly safe.
|
Sat Nov 07, 2015 7:54 pm |
|
|
RayNAiken
Joined: Tue Nov 05, 2013 9:24 pm Posts: 2747 Location: East Central South Carolina
Has thanked: 521 times
Been thanked: 2905 times
|
I was fortunate enough to train with Rusty Nance. He would say something like "My nose is starting to bleed make your altitude at xxx feet." Less thaan half what I was comfortable with. Then he would spring on me "Your machine.... my throttle." He would chop it back to idle and tell me to land. My emergency engine out landings were better than my normal ones. he always did that at least once every flight. I never knew when he would spring it on me.
_________________ ===RayNAiken===
|
Sat Nov 07, 2015 8:38 pm |
|
|
airscooter
Joined: Tue Nov 05, 2013 11:26 pm Posts: 58
Has thanked: 0 time
Been thanked: 60 times
|
Is there an FAA list of current real CFIs somewhere? I have looked on the FAA site but can't find one.
|
Sat Nov 07, 2015 9:06 pm |
|
|
MadMuz
Site Admin
Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY
Has thanked: 21874 times
Been thanked: 6221 times
|
_________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..
If electricity comes from ELECTRONS, then surely morality comes from MORONS??
|
Sun Nov 08, 2015 6:46 am |
|
|
farmer jim
Joined: Fri Nov 08, 2013 7:50 pm Posts: 1094
Has thanked: 2260 times
Been thanked: 881 times
|
Muz, IIRC, Arnies' motto goes sumthin like "FIC TWINS" ??!!!!! fj
|
Sun Nov 08, 2015 9:28 am |
|
|
JonCarleton
Joined: Mon Jun 09, 2014 9:49 am Posts: 781 Location: Lower Spiral Arm of the Milky Way Galaxy
Has thanked: 140 times
Been thanked: 1078 times
|
AirScooter: There is not an online CFI list maintained by the FAA. However, there is a license/rating lookup on a one-at-a-time basis. Note that you must divulge your identity to use it. The National Association of Flight Instructors maintains a list of its members and their ratings, but few gyroplane CFIs are NAFI members.
_________________ Jon Carleton Private ASEL Instrument Sport Pilot Gyroplane
|
Sun Nov 08, 2015 2:58 pm |
|
|
|
Page 1 of 1
|
[ 15 posts ] |
|
Who is online |
Users browsing this forum: Henry Bowman and 1023 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|