SkyWolverines.com
http://skywolverines.com/

Who knows this guy?
http://skywolverines.com/viewtopic.php?f=6&t=3777		 Page 1 of 1
Author:  elwood [ Thu Mar 10, 2016 7:44 am ]
Post subject:  Who knows this guy?
Some guy in North Atlanta selling gyro kits......Hmmmm looks like older MTO...? ? ?
Anyone know anything?
https://www.barnstormers.com/cat.php?mode=search

I will send him an Email
Author:  Flying Wolverine [ Thu Mar 10, 2016 8:18 am ]
Post subject:  Re: Who knows this guy?
Scott what search engine do u use....I look for stuff like this all the time and you seem to find it first.

Interesting. A single place....
Author:  elwood [ Thu Mar 10, 2016 8:36 am ]
Post subject:  Re: Who knows this guy?
Yeah it looks kinda cool, I actually did not find this...it was found by one of the peachstate guys.

I usually use Google as a search engine, because it seems to work well.
Author:  Flying Wolverine [ Thu Mar 10, 2016 9:02 am ]
Post subject:  Re: Who knows this guy?
I sent him an email. might call later if they look promising.....curious.
Author:  elwood [ Thu Mar 10, 2016 9:36 am ]
Post subject:  Re: Who knows this guy?
I kinda like it, do your own finishing and engine install.
Author:  loftus [ Thu Mar 10, 2016 10:01 am ]
Post subject:  Re: Who knows this guy?
Neither is an original MTO of course. Possibly the first is a basic MTO frame and body. Possibly recovered from an accident, but with different tail etc.
Looks like clone designs built from scratch...........
Author:  JonCarleton [ Thu Mar 10, 2016 11:22 am ]
Post subject:  Re: Who knows this guy?
The guy is right around the corner from us. He NEEDS to join Peach State!
Author:  elwood [ Thu Mar 10, 2016 11:27 am ]
Post subject:  Re: Who knows this guy?
I agree! No one makes a cool single place Eurogyro, Magni used to but I don't think they do any more.
I like the fact that it is unfinished and it used the Yamaha engine, He must have done some research...
Author:  Flying Wolverine [ Thu Mar 10, 2016 11:35 am ]
Post subject:  Re: Who knows this guy?
How is it he is this into gyro's and you guys don't know him? :realcrazy

Wonders never cease..... :noidea :D
Author:  JonCarleton [ Thu Mar 10, 2016 11:42 am ]
Post subject:  OK, I know these folks!
I met them at Zephyrhills when I was working on my license. They are both working with Greg Spicola for their gyroplane add-ons. Paul and Alex are importing Russian machines. The single is 15K with prop, rotors and rotorhead (minus engine, and avionics). The tandem is 25K. They will be at Sun N' Fun and -probably- Bensen Days.

They also had a Dominator 2-place clone they brought from Russia that was very well built. More as I get it. I do intend to visit their shop soon.
Author:  MadMuz [ Thu Mar 10, 2016 4:23 pm ]
Post subject:  Re: Who knows this guy?
I like the look of the single :like :lick :koolaid :yoda2 :Wolvie

:Confederate
Author:  SWilliams [ Fri Mar 11, 2016 12:49 am ]
Post subject:  Re: Who knows this guy?
Realy haven't seen a single seat that I thought Realy looked good tell today. That is a Realy nice look.

Sincerely SWilliams
Author:  MadMuz [ Fri Mar 11, 2016 5:58 am ]
Post subject:  Re: Who knows this guy?
I could see my :beefcake butt in one of them singles .... the tail would let it be nice and playful too :like :yoda2 :Wolvie

:Confederate
Author:  elwood [ Fri Mar 11, 2016 10:16 am ]
Post subject:  Re: Who knows this guy?
I think there would be a market for the single place for sure....
and 15k and 25k is not really that bad, a new sportcopter single will cost at least 25K

At least this way you can choose youe engine and not pay 25K for a rotax, just sayin'.
Author:  elwood [ Fri Mar 11, 2016 10:23 am ]
Post subject:  Re: Who knows this guy?
Who makes the adapter for the 3 cyl? I know that Teal does one for the 4 cyl.
Author:  Flying Wolverine [ Fri Mar 11, 2016 10:31 am ]
Post subject:  Re: Who knows this guy?
Racer could not help me out with a 6mth to a yr. possible backlog to make an adapter I could buy from him, that's the main reason I switched course and went with a
Teal adapter. No regrets though...all that HP means I won't have to upgrade later or ever hopefully. :D
Author:  elwood [ Fri Mar 11, 2016 11:59 am ]
Post subject:  Re: Who knows this guy?
I thought there was someone else who was making an adapter for the 3 cyl besides racer....perhaps it was Neil Hintz, not sure.
Author:  Flying Wolverine [ Fri Mar 11, 2016 12:23 pm ]
Post subject:  Re: Who knows this guy?
Yep that's who it is. His solution is quit a bit more $$. He includes the redrive unit. I already had one I wanted to use.

I need to add his info to the yammie info page I started.

The more solutions the better. Wish Jake would conjure up some of these parts. :half

I like to support the local ppl when I can. :like
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/