SkyWolverines.com
http://skywolverines.com/

The Hungarocopter crashed
http://skywolverines.com/viewtopic.php?f=6&t=2662
Page 1 of 1

Author:  Gabor [ Thu Jun 04, 2015 3:26 pm ]
Post subject:  The Hungarocopter crashed

Apparently the engine quit.
This happened tonight over there.
He survived the crash but was airlifted with very serious injuries.

Author:  kraut [ Thu Jun 04, 2015 4:33 pm ]
Post subject:  Re: The Hungarocopter crashed

Darn, very sorry to hear that.

K.

Author:  MadMuz [ Thu Jun 04, 2015 10:19 pm ]
Post subject:  Re: The Hungarocopter crashed

sorry to hear that Gabs, I hope his injuries aren't too bad :eek

The machine doesn't look to be too badly damaged? Did it manage to auto all right? or was it a rotors stoped.... and flop? :noidea :pop :wol2 :Wolvie

Author:  Gabor [ Thu Jun 04, 2015 10:21 pm ]
Post subject:  Re: The Hungarocopter crashed

MadMuz wrote:
The machine doesn't look to be too badly damaged?

Well if you are standing next to a helicopter and the rotorhead is below your eye level.....it is bad!
It means the under carriage has not only collapsed but your spinal chord is toast!
Ask Hilly. :pbunny :bunny

Author:  Hillberg [ Thu Jun 04, 2015 10:24 pm ]
Post subject:  Re: The Hungarocopter crashed

IMPACT LIKE THAT YOUR INTERNAL ORGINS DISPLACE AND YOU BLEED OUT, Bones will heal .bleed outs your toast,

Author:  Gabor [ Thu Jun 04, 2015 10:25 pm ]
Post subject:  Re: The Hungarocopter crashed

Here is another pic

Author:  MadMuz [ Thu Jun 04, 2015 10:25 pm ]
Post subject:  Re: The Hungarocopter crashed

Have you got any pics of the machine before the crash? So, he has buggered his back? shit! :killme :wol2 :Wolvie

Author:  Hillberg [ Thu Jun 04, 2015 10:28 pm ]
Post subject:  Re: The Hungarocopter crashed

machine is built too stiff all the energy is passed on to the meat servos. :bunny

Author:  Gabor [ Thu Jun 04, 2015 10:28 pm ]
Post subject:  Re: The Hungarocopter crashed

yeah

Author:  Gabor [ Thu Jun 04, 2015 10:38 pm ]
Post subject:  Re: The Hungarocopter crashed

damn

Author:  MadMuz [ Thu Jun 04, 2015 10:40 pm ]
Post subject:  Re: The Hungarocopter crashed

Neat looking machine.... I hope he is ok to rebuild it and continue soon... is the pilot the builder or just the test pilot for the builder?

I like the 'sexperimental' written on it :laughing :laughing :wol2 :Wolvie

Author:  Gabor [ Thu Jun 04, 2015 10:43 pm ]
Post subject:  Re: The Hungarocopter crashed

No he was only a pilot. Pretty experienced too.....
He was on the radio saying that a red light came on and that was the last transmission on the radio from him.
The builder is trying to figure out what had happened as we speak.

Author:  Gabor [ Thu Jun 04, 2015 10:46 pm ]
Post subject:  Re: The Hungarocopter crashed

This was the final look with the cowlings on it.

Author:  elwood [ Fri Jun 05, 2015 12:12 am ]
Post subject:  Re: The Hungarocopter crashed

Dang, that is too bad, hope he will be OK..

Author:  MadMuz [ Fri Jun 05, 2015 5:00 am ]
Post subject:  Re: The Hungarocopter crashed

I'll say... no good at all :cry

It is a good reminder to all of us about what is under our seats.... I have seen seat mounts on gyros that if one has a splat landing from a vertical to the ground or a REALLY heavy landing.... if the seat supports bolts fail, the uprights would go thru the back of the pilots legs (and out the front) :eek :puke

You need to think where the seat will go and where what is holding it in place will go in a failure.... have the seat mounts bent in such a way a real big vertical jolt will allow it to collapse without stabbing the occupant.... and that if the seat drops any distance, that the pilot don't get trapped or injured from the seatbelts tightening when the seat drops down.... my ex-mother in law T boned a light pole on the passenger side right at the pillar, bent the car like a banana.... her seatbelt tightened and she couldn't push the button to release it.... she broke her sternum and 7 ribs broke off at her spine and she was trapped for 20 minutes until someone found her :eek :drama :realcrazy :Wolvie

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/