|
It is currently Sat Nov 23, 2024 9:36 pm |
|
All times are UTC - 5 hours [ DST ] |
|
Page 1 of 1 |
[ 14 posts ] |
| Print view | Previous topic | Next topic |
Phoenix Rotor Blades
| Author | Message | ||
|---|---|---|---|
|
Joined: Mon Mar 17, 2014 10:40 pm Posts: 14 Location: Bountiful, Utah Has thanked: 0 time Been thanked: 1 time 
|
Considering all options on blades.
Would like to know about experiences with Phoenix blades. The good, bad and the ugly. May consider a good used set of 25 footers that have and adjustable pitch hub bar. here are the current prices from their web site. Thanks Mark Part Number Disk Span Price Crating PRC-220 22' Rotor Disk $3,045 $145 PRC-230 23' Rotor Disk $3,045 $145 PRC-240 24' Rotor Disk $3,245 $155 PRC-250 25' Rotor Disk $3,245 $155 PRC-260 26' Rotor Disk $3,345 $160 PRC-270 27' Rotor Disk $3,445 $165 PRC-280 28' Rotor Disk $3,545 $170 PRC-290 29' Rotor Disk $3,645 $175 PRC-300 30' Rotor Disk $3,745 $180 PRC-310 31' Rotor Disk $3,845 $185 PRC-320 32' Rotor Disk $3,945 $190 _________________ Fly Safe, Fly Often Mark Archibald Bountiful, Utah Air Command CLT |
||
| Tue Nov 04, 2014 4:06 pm |
|
||
|
|||
|
Site Admin 
|
Mark I bought a set of 25 footer Sport Copter blades.
I will never look back! I love them. Of course you'll find different opinions on different blades. They are smooth as a butter. Minus zero stick shake. They come up fast and have lots of inertia. Paid 1700????? I think...... _________________  A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Tue Nov 04, 2014 4:17 pm |
|
||
|
|||
|
Joined: Mon Jun 09, 2014 9:49 am Posts: 781 Location: Lower Spiral Arm of the Milky Way Galaxy Has thanked: 140 times Been thanked: 1078 times
|
I got a close look at a pair the other day. One of my club members got a set. Only thing I can say so far is IF they are out of balance, it is going to be tricky to fix. The endcaps are riveted on. Getting it right and not changing it by riveting it back together is going to be difficult. We all hope it is in spec to start with. The previous owner of the blades complained about stick shake.
I intend to fly them Saturday if they check out OK. I'll know more then. Just on first impression, I would probably buy a set of Dragon Wings before Phoenix rotors, if it was a price thing. Sport Copter blades are certainly the "Rolls Royce." No argument there, but they are a bit pricey. I will say that I am not a great fan of Dragon Wings > 25' or on a heavy machine. _________________ Jon Carleton Private ASEL Instrument Sport Pilot Gyroplane |
||
| Tue Nov 04, 2014 6:03 pm |
|
||
|
|||
 Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
Phoenix is WAY WAY over priced> For that price I would buy a new set of McCutchens, They are really sweet.
What is the weight of your machine? What altitude? what HP? what size prop? _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Tue Nov 04, 2014 6:37 pm |
|
||
|
|||
 Site Admin  Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
What size pilot?
   1000# ???   _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Tue Nov 04, 2014 9:14 pm |
|
||
|
|||
|
Joined: Mon Mar 17, 2014 10:40 pm Posts: 14 Location: Bountiful, Utah Has thanked: 0 time Been thanked: 1 time
|
Gabor wrote: Mark I bought a set of 25 footer Sport Copter blades. I will never look back! I love them. Of course you'll find different opinions on different blades. They are smooth as a butter. Minus zero stick shake. They come up fast and have lots of inertia. Paid 1700????? I think...... $1700 NEW? or used? Thats in my budget! Thanks Gabor _________________ Fly Safe, Fly Often Mark Archibald Bountiful, Utah Air Command CLT |
||
| Tue Nov 04, 2014 9:28 pm |
|
||
|
|||
|
Site Admin Joined: Tue Sep 02, 2014 7:45 am Posts: 10129 Location: Poona, Qld, OZZY Has thanked: 21874 times Been thanked: 6221 times
|
madwinger wrote: Gabor wrote: Mark I bought a set of 25 footer Sport Copter blades. I will never look back! I love them. Of course you'll find different opinions on different blades. They are smooth as a butter. Minus zero stick shake. They come up fast and have lots of inertia. Paid 1700????? I think...... $1700 NEW? or used? Thats in my budget! Thanks Gabor Going by the website prices, I would say it is $1,700 each blade _________________ I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned.. If electricity comes from ELECTRONS, then surely morality comes from MORONS?? |
||
| Tue Nov 04, 2014 9:30 pm |
|
||
|
|||
|
Joined: Mon Mar 17, 2014 10:40 pm Posts: 14 Location: Bountiful, Utah Has thanked: 0 time Been thanked: 1 time
|
MadMuz wrote: madwinger wrote: Gabor wrote: Mark I bought a set of 25 footer Sport Copter blades. I will never look back! I love them. Of course you'll find different opinions on different blades. They are smooth as a butter. Minus zero stick shake. They come up fast and have lots of inertia. Paid 1700????? I think...... $1700 NEW? or used? Thats in my budget! Thanks Gabor Going by the website prices, I would say it is $1,700 each blade Both Sport Copter blades and new Skywheels are 4 grand and up. Will just have to keep putting pennies in the jar! mark _________________ Fly Safe, Fly Often Mark Archibald Bountiful, Utah Air Command CLT |
||
| Mon Nov 10, 2014 2:05 pm |
|
||
|
|||
|
Site Admin
|
They had 5 hours on them. Kevin Richey had them. The gyro was demolished with some other blades on. These blades stayed in the box!
I got a great deal on them  But I am eyeballing the new Mc Cuthen blades. I might sell these _________________ A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant! A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense. |
||
| Mon Nov 10, 2014 2:07 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
The only bad thing i have heard about the new McCutchen blades is the price, the intro price was attractive...now not so much.
_________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Mon Nov 10, 2014 2:12 pm |
|
||
|
|||
|
Joined: Mon Jun 09, 2014 9:49 am Posts: 781 Location: Lower Spiral Arm of the Milky Way Galaxy Has thanked: 140 times Been thanked: 1078 times
|
Well, I -nearly- flew a set of the extruded Phoenix blades this past Saturday. There were issues with the machine not directly related to the rotors that prevent me from saying anything kind about the blades. That said, so far, they have not impressed. However, that could be more directly related to gyroplane issues than the rotors themselves.
I can only say now that unless they suddenly show off some spectacular properties that have yet remained hidden, Phoenix extruded blades would not be my first choice in rotors. Although, I doubt I would toss them in the bin if someone gave me a set. _________________ Jon Carleton Private ASEL Instrument Sport Pilot Gyroplane |
||
| Mon Nov 10, 2014 3:32 pm |
|
||
|
|||
|
Joined: Mon Mar 17, 2014 10:40 pm Posts: 14 Location: Bountiful, Utah Has thanked: 0 time Been thanked: 1 time
|
Gabor wrote: They had 5 hours on them. Kevin Richey had them. The gyro was demolished with some other blades on. These blades stayed in the box! I got a great deal on them But I am eyeballing the new Mc Cuthen blades. I might sell these Gabor, are they 8" chord? Fixed or adjustable pitch? 25"? And If you do, please let me know. Thanks Mark _________________ Fly Safe, Fly Often Mark Archibald Bountiful, Utah Air Command CLT |
||
| Tue Nov 11, 2014 5:55 pm |
|
||
|
|||
|
Joined: Mon Mar 17, 2014 10:40 pm Posts: 14 Location: Bountiful, Utah Has thanked: 0 time Been thanked: 1 time
|
JonCarleton wrote: Well, I -nearly- flew a set of the extruded Phoenix blades this past Saturday. There were issues with the machine not directly related to the rotors that prevent me from saying anything kind about the blades. That said, so far, they have not impressed. However, that could be more directly related to gyroplane issues than the rotors themselves. I can only say now that unless they suddenly show off some spectacular properties that have yet remained hidden, Phoenix extruded blades would not be my first choice in rotors. Although, I doubt I would toss them in the bin if someone gave me a set. Thank for the review Jon, Lots to consider. Mark _________________ Fly Safe, Fly Often Mark Archibald Bountiful, Utah Air Command CLT |
||
| Tue Nov 11, 2014 6:02 pm |
|
||
|
|||
|
Joined: Wed Nov 06, 2013 5:21 am Posts: 7151 Location: Lost Has thanked: 115 times Been thanked: 8645 times
|
If phoenix were priced competitively with dragon wings, they would probably sell more and at least get their name out there.
the OLD rotorhawks were good blades, not near the performance of the dragon wings, but they flew smooth and did not flap. I don't know anything about the new ones. When I bought my last set of blades from ernie, they were $1250.00!!! _________________ It's never too late to be a bad example. I spent all my money on Bikes, Broads, and Booze, the rest I wasted. |
||
| Tue Nov 11, 2014 6:17 pm |
|
||
|
|||
|
|
Page 1 of 1 |
[ 14 posts ] |
|
All times are UTC - 5 hours [ DST ] |
Who is online |
Users browsing this forum: Freebird, skyguynca and 707 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |