It is currently Sat Nov 23, 2024 6:46 pm



Reply to topic  [ 36 posts ]  Go to page 1, 2  Next
 What's the best looking/shaped gyrocopter cabin? 
Author Message
User avatar

Joined: Sat Nov 12, 2022 6:54 am
Posts: 18
Has thanked: 20 times
Been thanked: 27 times
What's your favourite? For me I like the owen dull cabin, the kruza and UFO cabins from NZ are mint, but the best ever got to be the groen hawk, i think it looks like the gyro baby of a bell jetranger. Wish there were more cabs with the curves like that


Thu Jan 05, 2023 1:39 am
Profile
User avatar

Joined: Wed Nov 06, 2013 4:03 pm
Posts: 2408
Has thanked: 13 times
Been thanked: 3209 times
Based on looks alone, I am gonna have to go with the AC-20 Arrowcopter.
And of course I am partial to my gyro. The cross between jet black, carbon fiber and bright yellow is stunning to this day!


You do not have the required permissions to view the files attached to this post.


Thu Jan 05, 2023 2:03 am
Profile
Online
User avatar

Joined: Thu Nov 07, 2013 12:56 am
Posts: 3073
Location: VERY LOW LOW LOW EARTH ORBIT
Has thanked: 3078 times
Been thanked: 3854 times
Helicopters too? :pbunny


You do not have the required permissions to view the files attached to this post.


Thu Jan 05, 2023 2:09 am
Profile
User avatar

Joined: Sat Nov 12, 2022 6:54 am
Posts: 18
Has thanked: 20 times
Been thanked: 27 times
Henry Bowman wrote:
Based on looks alone, I am gonna have to go with the AC-20 Arrowcopter.
And of course I am partial to my gyro. The cross between jet black, carbon fiber and bright yellow is stunning to this day!


Thats not a cabin henry :D A stunner for sure tho :clap:


Thu Jan 05, 2023 3:05 am
Profile
User avatar

Joined: Sat Nov 12, 2022 6:54 am
Posts: 18
Has thanked: 20 times
Been thanked: 27 times
Hillberg that looks like someone drew a helicopter and fucked up the aspect ratio width on microsoft paint :D :D :D bet it cuts through the air quick !! is it turbine?


Thu Jan 05, 2023 3:08 am
Profile
User avatar

Joined: Wed Nov 06, 2013 4:03 pm
Posts: 2408
Has thanked: 13 times
Been thanked: 3209 times
Ha! You know I just glossed over that part and did not notice you said cabin! :lick


Thu Jan 05, 2023 3:12 am
Profile

Joined: Tue Mar 24, 2020 5:39 am
Posts: 1056
Location: France
Has thanked: 649 times
Been thanked: 1735 times
the DTA Jyro was really good looking in my opinion :

Image

it is terrible to think that the DTA factory after having been bought by a Chinese company bankrupt ...

It is true that the arrow copter was really nice too

Gyroblazer, are you planning to build an enclosure ?


Thu Jan 05, 2023 5:26 am
Profile

Joined: Sat Jan 24, 2015 3:53 am
Posts: 144
Location: QLD, OZ
Has thanked: 48 times
Been thanked: 214 times
Some photos of Owen Dull's NEWO pod


You do not have the required permissions to view the files attached to this post.


Thu Jan 05, 2023 6:39 am
Profile
Online
Site Admin
User avatar

Joined: Tue Sep 02, 2014 7:45 am
Posts: 10129
Location: Poona, Qld, OZZY
Has thanked: 21874 times
Been thanked: 6221 times
I like Benry's style of cabin (open frame) ... or like GyroBlazer's with just a windshield/bug deflector :like :koolaid :yoda2 :Wolvie

:Jim

:Confederate

_________________
I do all of my own stunts..... most of them are even planned! Ok, Ok.... some of them are planned..

If electricity comes from ELECTRONS, then surely morality comes from MORONS??


Thu Jan 05, 2023 9:05 am
Profile
Online
User avatar

Joined: Thu Nov 07, 2013 12:56 am
Posts: 3073
Location: VERY LOW LOW LOW EARTH ORBIT
Has thanked: 3078 times
Been thanked: 3854 times
GyroBlazer wrote:
Hillberg that looks like someone drew a helicopter and fucked up the aspect ratio width on microsoft paint :D :D :D bet it cuts through the air quick !! is it turbine?


Yes - the yellow one cruised at 148 mph in a dive hit 184 mph the black one is a refinement [speed speed aerobatics]


My contribution to aviation was the Jet Exec - I gave the design to Dave & Walt at Kiss Aviation who made the kits.

It all started with the Rotor Mouse and a Napkin during lunch at Bobs Café Corona Airport


You do not have the required permissions to view the files attached to this post.


Thu Jan 05, 2023 2:55 pm
Profile

Joined: Tue Mar 24, 2020 5:39 am
Posts: 1056
Location: France
Has thanked: 649 times
Been thanked: 1735 times
I love the exec rotor head system ... I even tought of coying it to try to make the michel cros regulator ..

we have an exec in the next hangar, it has a boat engine .. it works whell and the guy even traines people on it

here are the homemades of our hangar

Image

on the left (the blue one) this is the most protective "enclosure" it was possible to smoke in it , my mate could fly it hours and hours without getting cold even in winter

the white one was also fairly protective it had a bmw flat twine engine which stopped in flight because of a corrupted fuel tank

the red one is mine, it's enclosure is ok but the throttle is not protected, I have to wear a glove one the left hand in the winter
the enclosure give it a good 120km/h cruise speed at 5800 rpm

the last on the right had no enclosure, it's cruise speed with the same engime was 90 km/h ... it crashed because an engine failure .... my mate had forgoten a screws in the gear box ...he did a vertical autorotation on above a field ... trouble is that he wend backward, the gyro turned 180° and landed vertically .. my mate walked away with small injuries

I think it is worth mounting a small enclosure to fly in the winter and to fly 30 km/h faster


Thu Jan 05, 2023 5:35 pm
Profile
User avatar

Joined: Wed Nov 06, 2013 5:21 am
Posts: 7151
Location: Lost
Has thanked: 115 times
Been thanked: 8645 times
I had an air command pod that I put on My Dom in the winter, it worked well.

_________________
It's never too late to be a bad example.

I spent all my money on Bikes, Broads, and Booze, the rest I wasted.


Fri Jan 06, 2023 2:22 pm
Profile

Joined: Tue Mar 24, 2020 5:39 am
Posts: 1056
Location: France
Has thanked: 649 times
Been thanked: 1735 times
did it changed it's yaw stability ?


Fri Jan 06, 2023 4:38 pm
Profile
User avatar

Joined: Wed Nov 06, 2013 5:21 am
Posts: 7151
Location: Lost
Has thanked: 115 times
Been thanked: 8645 times
Yes, I had no rudder authority at idle while landing.

_________________
It's never too late to be a bad example.

I spent all my money on Bikes, Broads, and Booze, the rest I wasted.


Sun Jan 08, 2023 3:56 pm
Profile
User avatar

Joined: Wed Nov 06, 2013 5:21 am
Posts: 7151
Location: Lost
Has thanked: 115 times
Been thanked: 8645 times
New Russian tangos.


You do not have the required permissions to view the files attached to this post.

_________________
It's never too late to be a bad example.

I spent all my money on Bikes, Broads, and Booze, the rest I wasted.


Sun Jan 08, 2023 6:07 pm
Profile
User avatar

Joined: Sat Nov 12, 2022 6:54 am
Posts: 18
Has thanked: 20 times
Been thanked: 27 times
RossM wrote:
Some photos of Owen Dull's NEWO pod


Beautiful, all the curves in the right places. What happened to owen dulls cab mould?


Sun Jan 08, 2023 6:22 pm
Profile
User avatar

Joined: Sat Nov 12, 2022 6:54 am
Posts: 18
Has thanked: 20 times
Been thanked: 27 times
Girodreamer wrote:
Gyroblazer, are you planning to build an enclosure ?


Not at the moment but in the future yes

It was a dark wet rainy day out on the station oneday and I heard an chopper so I ran outside and saw the neighbors R44 cruising past in the rain. Thats where I got the idea to have a roof cabin so I can keep dry and still fly in those conditins especially if i have no choice flying on a 2000km trip or something. I dont wanna euro factory made gyro tho I like homebuild bolt together machines the best


Sun Jan 08, 2023 6:26 pm
Profile

Joined: Tue Mar 24, 2020 5:39 am
Posts: 1056
Location: France
Has thanked: 649 times
Been thanked: 1735 times
elwood wrote:
Yes, I had no rudder authority at idle while landing.


did you have a tall tail or the classic aircommand Rudder ?


Mon Jan 09, 2023 2:30 am
Profile

Joined: Tue Mar 24, 2020 5:39 am
Posts: 1056
Location: France
Has thanked: 649 times
Been thanked: 1735 times
GyroBlazer wrote:
Girodreamer wrote:
Gyroblazer, are you planning to build an enclosure ?


Not at the moment but in the future yes

It was a dark wet rainy day out on the station oneday and I heard an chopper so I ran outside and saw the neighbors R44 cruising past in the rain. Thats where I got the idea to have a roof cabin so I can keep dry and still fly in those conditins especially if i have no choice flying on a 2000km trip or something. I dont wanna euro factory made gyro tho I like homebuild bolt together machines the best


yes it must give a totally other kind of sensations to fly without wind/rain in the face ..

I agree with you that bolted frames are a good thing (because it easy to repair !).

as for the roof cabin the main issue is to fing a stock windshield which can be found in the future in case you brake yours

My friends having DTA jyros have this problem , because in case the brake their windshield thet won't be able to buy an other one ..because DTA went bankrupt ..

I also think it is more then dangerous to build a cabin roof with flat plexiglass windshield... some have trieds in france and they crashed .. (big nose down drag momentum)


Mon Jan 09, 2023 2:40 am
Profile
User avatar

Joined: Wed Nov 06, 2013 5:21 am
Posts: 7151
Location: Lost
Has thanked: 115 times
Been thanked: 8645 times
Girodreamer wrote:
elwood wrote:
Yes, I had no rudder authority at idle while landing.


did you have a tall tail or the classic aircommand Rudder ?



It was the dominator tall tail.

_________________
It's never too late to be a bad example.

I spent all my money on Bikes, Broads, and Booze, the rest I wasted.


Mon Jan 09, 2023 6:54 am
Profile
Reply to topic   [ 36 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 561 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software.
Americanized by Maël Soucaze.