It is currently Wed Nov 27, 2024 7:36 pm



Reply to topic  [ 39 posts ]  Go to page Previous  1, 2
 back in the good old days 
Author Message
User avatar

Joined: Sun Nov 10, 2013 8:25 am
Posts: 4135
Has thanked: 5955 times
Been thanked: 4310 times
.
Here is my mole killing story :)

In 1986 I bought a nice little rural acreage that used to have a small cattle barn on it back in the 1930's and when the farmer cleaned the manure out of the barn every day he threw it into a swamp hole out back

50 years later that manure had composted into the nicest fertile garden soil you could ever wish for

Trouble is the moles liked to dig tunnels all through it so there was only one thing I could do ..... BLOW THEM MOLES UP !!!!!!

In my body shop I used a lot of industrial strength Lacquer Thinners to clean my paint guns and equipment and had a bunch of 5 gallon cans of the old dirty thinners I needed to dispose of.

I poured 10 gallons down a mole hole , tossed a match in , but all I got was a little whoosh of flame , then one of my coffee shop buddies said I needed a spark to make an explosion , an open flame just burns for a short time until the oxygen is consumed and then it self extinguishes.

So I hooked a lead wire and ground wire to an old sparkplug , pushed it way down the mole hole , put in another 10 gallons of volatile thinners , covered the hole and gave it time to vaporize underground . Then I hooked the wires to my lawnmower , spun the magneto to make a spark and KABOOM !!!!!

It was just like that movie Caddy Shack , dirt and fire and flames blew out of a whole bunch of mole-hole-entrances all over my garden. Most fun I ever had on a Saturday afternoon.

Trouble is it set fire to the old cow manure deep underground and it was smouldering away all week , my farmer neighbor said it would burn for years is I didn't put it out.. It took a 10hp waterpump with a 2" hose running for 3 days before I got it stopped.

A normal person with moles in the garden would simply have bought a $3.98 mole trap and solved the problem ...... BUT I AM ABNORMAL AND DO NOT WANT TO CHANGE !!!!!!!! :) :) :) :)


Tue May 20, 2014 5:28 pm
Profile
User avatar

Joined: Sun Nov 10, 2013 8:25 am
Posts: 4135
Has thanked: 5955 times
Been thanked: 4310 times
Hillberg wrote:
And we uses to tape marbles to the bottom of shot gun shells & drop them from R/C airplanes, :bunny


Would the marble make the shell go off ??? .... that sounds like fun. We used to embed shotgun shells in a dirt bank and try to hit the primer from 50 yards with a 22. They blow up real nice when you get a hit.


Tue May 20, 2014 5:42 pm
Profile
User avatar

Joined: Sun Nov 10, 2013 8:25 am
Posts: 4135
Has thanked: 5955 times
Been thanked: 4310 times
.
Years ago Pepsi made a 2 liter plastic bottle with a wide cap on it. I would drill a nice hole in the lid , get a bunch of used tire valve stems from the Goodyear shop and pop them into the lid with a bit of silicone to seal it.

Fill the Pepsi bottle half full of water , put the lid on and then about 50 psi of air

Makes a hell of a good blow up target and cost nothing

A little Crown Royal mixed while consuming the Pepsi , can add to the fun

Way too much Crown Royal makes a guy get ideas like putting a cup of gas in the bottle , 75 psi air , and a candle burning behind the target for ignition when you hit it.

Way way way too much Crown Royal and a guy starts trying to figure out how to get a lawnmower sparkplug inside the bottle :) :) :)


Tue May 20, 2014 6:00 pm
Profile

Joined: Tue Nov 05, 2013 9:24 pm
Posts: 2747
Location: East Central South Carolina
Has thanked: 521 times
Been thanked: 2905 times
My mom's three stage rocket made of pine straw.

Many moon cycles ago back when I was about 6 years old my mom and a neighbor were raking up pine straw.
She had raked it into a pile and tried to burn it but it was too damp to stay lit.
So she took a good portion off the top of the pile and poured some old gas on it.
She put more pine strsaw on top of that and poured more gas.
Then a third healthy pile on top of all of it.
She "had done this before" so we were told to stay back out of range.
She poured a "long fuse" and lit the end.
For some reason the ignition sequence went perfectly.
The first or booster pile lifted off carrying the other two stages with it at about an altitude of about 20 feet before the 2nd stage ignited and carried the top stage another 20 or more feet.
I have tried and tried and have never been able to duplicate the perfect ignition sequencing she got.

_________________
===RayNAiken===


Tue May 20, 2014 6:37 pm
Profile
User avatar

Joined: Sun Nov 10, 2013 8:25 am
Posts: 4135
Has thanked: 5955 times
Been thanked: 4310 times
.
Ray has a cool mom !!!!!!!!!!!!!!!!!!!!!!


Tue May 20, 2014 7:30 pm
Profile

Joined: Tue Dec 10, 2013 3:55 pm
Posts: 4163
Has thanked: 125 times
Been thanked: 5440 times
I love these stories. How did we escape alive? No liberals back then holding our hands.


Tue May 20, 2014 7:38 pm
Profile
Site Admin
User avatar

Joined: Sat Nov 02, 2013 2:18 pm
Posts: 11382
Has thanked: 16461 times
Been thanked: 10056 times
Growing up in communist Hungary we did not have cool western toys like those. No guns owned by individuals. No chance to make dangerous exploding things right? Soooo our version was one long threaded 1/2" bolt put a nut on it and turn the nut two turns. Shave off the heads of matches. Fill the nut with it and carefully compact it by using another 1/2' bolt very carefully turning it and tighten it down. Once the nut filled with match shavings use some soldering wire to wrap around the head of one bolt to make it heavier than the other side. Fold up a paper tent flattened so it acts like dart and put the other bolt through it right in the middle. Find a friend who lives in a condo with balcony. Wait for the victim to walk under and drop the bomb. Voila :der

_________________
Image
A walk in the woods helps me relax and release tension. The fact that I am dragging a body should be entirely irrelevant!
A simple thank you would have been enough for the morning coffee without all that "how did you get in here" nonsense.


Tue May 20, 2014 8:05 pm
Profile

Joined: Tue Nov 05, 2013 9:24 pm
Posts: 2747
Location: East Central South Carolina
Has thanked: 521 times
Been thanked: 2905 times
Bicycle wheel spokes.
Attachment:
spoke.jpg

Speaking of match heads...we used to pack the red stuff off match heads into these.
Then we would screw a spoke into the slotted end.
Hold a match on the barrel until it went off like a .22 on steroids.
I had one fail by splitting open like a daisy.


You do not have the required permissions to view the files attached to this post.

_________________
===RayNAiken===


Tue May 20, 2014 8:16 pm
Profile

Joined: Thu Nov 07, 2013 9:35 am
Posts: 1755
Location: Aloha, Oregon
Has thanked: 54 times
Been thanked: 725 times
When I was a kid I seen Tommy Milton and Dick Dick Wunderlich pack match heads into an empty CO2 bottle .
Then they stuck a fuzz into the hole and stuck it into a pice of pipe and then lit the fuzz .
That thing shot out of there like a rocket .
It was amazing being around those guys .


WOLVERINES !!!!!!!!!!!!!!!!!!!!!

_________________
Ever notice in life occasionally you'll come across somebody you never should have fucked with ?
Well that's me !


Tue May 20, 2014 8:52 pm
Profile

Joined: Fri Nov 22, 2013 9:08 pm
Posts: 640
Has thanked: 45 times
Been thanked: 153 times
RayNAiken wrote:
My mom's three stage rocket made of pine straw.

Many moon cycles ago back when I was about 6 years old my mom and a neighbor were raking up pine straw.
She had raked it into a pile and tried to burn it but it was too damp to stay lit.
So she took a good portion off the top of the pile and poured some old gas on it.
She put more pine strsaw on top of that and poured more gas.
Then a third healthy pile on top of all of it.
She "had done this before" so we were told to stay back out of range.
She poured a "long fuse" and lit the end.
For some reason the ignition sequence went perfectly.
The first or booster pile lifted off carrying the other two stages with it at about an altitude of about 20 feet before the 2nd stage ignited and carried the top stage another 20 or more feet.
I have tried and tried and have never been able to duplicate the perfect ignition sequencing she got.



sounds like your mom used to work for nasa. :laughing


Tue May 20, 2014 9:13 pm
Profile

Joined: Fri Nov 22, 2013 9:08 pm
Posts: 640
Has thanked: 45 times
Been thanked: 153 times
tater gatling gun. I want one :)



Tue May 20, 2014 9:21 pm
Profile

Joined: Thu Nov 07, 2013 9:35 am
Posts: 1755
Location: Aloha, Oregon
Has thanked: 54 times
Been thanked: 725 times
Nice !


WOLVERINES !!!!!!!!!!!!!!!!!!!!!

_________________
Ever notice in life occasionally you'll come across somebody you never should have fucked with ?
Well that's me !


Wed May 21, 2014 10:06 am
Profile

Joined: Tue Nov 05, 2013 9:24 pm
Posts: 2747
Location: East Central South Carolina
Has thanked: 521 times
Been thanked: 2905 times
redbaron wrote:
RayNAiken wrote:
My mom's three stage rocket made of pine straw.

Many moon cycles ago back when I was about 6 years old my mom and a neighbor were raking up pine straw.
She had raked it into a pile and tried to burn it but it was too damp to stay lit.
So she took a good portion off the top of the pile and poured some old gas on it.
She put more pine strsaw on top of that and poured more gas.
Then a third healthy pile on top of all of it.
She "had done this before" so we were told to stay back out of range.
She poured a "long fuse" and lit the end.
For some reason the ignition sequence went perfectly.
The first or booster pile lifted off carrying the other two stages with it at about an altitude of about 20 feet before the 2nd stage ignited and carried the top stage another 20 or more feet.
I have tried and tried and have never been able to duplicate the perfect ignition sequencing she got.



sounds like your mom used to work for nasa. :laughing


No but she did work as a welders assistant during WWII building ships.

_________________
===RayNAiken===


Wed May 21, 2014 6:27 pm
Profile

Joined: Thu Nov 07, 2013 9:35 am
Posts: 1755
Location: Aloha, Oregon
Has thanked: 54 times
Been thanked: 725 times
My grandma was a ship welder during WWII.


WOLVERINES !!!!!!!!!!!!!!!!!!!!!


You do not have the required permissions to view the files attached to this post.

_________________
Ever notice in life occasionally you'll come across somebody you never should have fucked with ?
Well that's me !


Wed May 21, 2014 10:53 pm
Profile

Joined: Fri Nov 22, 2013 9:08 pm
Posts: 640
Has thanked: 45 times
Been thanked: 153 times
ScaryGary wrote:
My grandma was a ship welder during WWII.


WOLVERINES !!!!!!!!!!!!!!!!!!!!!

that is awesome. my grandmaw grew a garden.and kept the spoiled brats feed. :)


Thu May 22, 2014 12:22 am
Profile

Joined: Thu Nov 07, 2013 9:35 am
Posts: 1755
Location: Aloha, Oregon
Has thanked: 54 times
Been thanked: 725 times
My grandma grew reefer for the Navy .


WOLVERINES !!!!!!!!!!!!!!!!!!!!!

_________________
Ever notice in life occasionally you'll come across somebody you never should have fucked with ?
Well that's me !


Thu May 22, 2014 12:50 am
Profile
User avatar

Joined: Sun Nov 10, 2013 8:25 am
Posts: 4135
Has thanked: 5955 times
Been thanked: 4310 times
.
.
That is so cool Gary ... love that picture.


Thu May 22, 2014 2:41 am
Profile

Joined: Thu Nov 07, 2013 9:35 am
Posts: 1755
Location: Aloha, Oregon
Has thanked: 54 times
Been thanked: 725 times
That is my favorite picture of my Grandma .
I was home on leave from Navy bookcamp and AD/A school 1982 just before I went to the Philippines for two years .
That picture was taken at the Decatur Illinois Airport.
When I was in High-school I would skip school and fly down to Decatur to spend the day with my Grandma .


WOLVERINES !!!!!!!!!!!!!!!!!!!!!

_________________
Ever notice in life occasionally you'll come across somebody you never should have fucked with ?
Well that's me !


Thu May 22, 2014 10:20 am
Profile

Joined: Thu Dec 05, 2013 9:38 pm
Posts: 2541
Location: Atlanta GA area
Has thanked: 800 times
Been thanked: 1151 times
redbaron wrote:
Then we had the bright idea to put a firecracker in the barrel but it split the gun in two perfect halves along the seams. .... but then we each had half a gun so we were happy.

thats how socialism works! :)


YUP...

Everyone gets the gun, however none of the guns work so they are worthless.

Socialism at its textbook best.... no value, all feeling.

_________________
John Morgan
PP-SEL
Former member PRA
Member PeachState Rotorcraft club
Member Sunstate Rotor & Wing Club
Owner/builder of
The Subinator: Single place Dominator/Subaru EA-81
(currently in full restoration)
Soon to offer machine shop services


Sun May 25, 2014 8:42 pm
Profile
Reply to topic   [ 39 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: Freebird, Henry Bowman, MadMuz, skyguynca and 762 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software.
Americanized by Maël Soucaze.