SkyWolverines.com
http://skywolverines.com/

Behemoth for sale
http://skywolverines.com/viewtopic.php?f=11&t=1972		 Page 3 of 6
Author:  Hellified [ Mon Jan 12, 2015 9:04 am ]
Post subject:  Re: Behemoth for sale
Madmuz- Hanging from a 2nd point.....if....its a strong point....will give a larger intersecting angle of the two hang lines...and makes it more accurate.

We also balanced it on the mains and that vertical line also intersected the double hang intersection...nicely varifying it.

Technically, the rotor blades should have had their droop held to their cone angle while flying. The dropping blades slightly lower the blades CG that they are actually at during flight. We didn't have any light cord to do this. It would have raised the actual CG of the gyro a few tenths of a inch is all...so it was miniscule.

Some gyros can't be safely hung other than the teeter bolt...so then, yes...balance on mains and shoot a laser beam vertically from the axle centerline through the hang point....and....voila...a dead accurate CG plot!
Author:  Animal [ Mon Jan 12, 2015 9:47 am ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
See it for yourself. Looks good to me.

wow that did look smooth, but then again Greg can make any gyro look smooth.

yeah there is no dought that is a fine machine. and I bet it sells fast. How many hours does it have on it now?

still hard to believe you are selling it. I sure hope your new Design works out as nicely. looking forward to that build thread.

if you get enough Funds, how long do you think it would be before you would have the new gyro Built?

I saw ya got it listed on Barnstormer.com.
Author:  Gabor [ Mon Jan 12, 2015 9:57 am ]
Post subject:  Re: Behemoth for sale
SOLD!!!!!!!
Author:  Animal [ Mon Jan 12, 2015 10:00 am ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
SOLD!!!!!!!
I knew that would not take long. is it staying local?
Author:  Hellified [ Mon Jan 12, 2015 10:09 am ]
Post subject:  Re: Behemoth for sale
Way to go...!
Author:  Gabor [ Mon Jan 12, 2015 10:10 am ]
Post subject:  Re: Behemoth for sale
Yes. Florida
Author:  MadMuz [ Mon Jan 12, 2015 10:12 am ]
Post subject:  Re: Behemoth for sale
Congrats Gabs :koolaid Who is the lucky dog? Er, I mean, new owner? A local? :noidea :pop :yoda2 :Wolvie
Author:  Animal [ Mon Jan 12, 2015 10:17 am ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
Yes. Florida
Nice, that means we will still get to see it flying sometime.
you did a hell of a job Building it,and it would be ashame for it to go out of state and not be seen again.
now get to work on that new gyro.. :)
how much work space will the new gyro take up when being built versuse the behemoth? like was the designed rotor mast height? and how wide will it be. I remember you showed me some drawings of it, but I don't think ya told me any size info. can't wait to see the new bird come together.
Author:  Gabor [ Mon Jan 12, 2015 10:17 am ]
Post subject:  Re: Behemoth for sale
Not until he picks it up :wol2
Author:  Gabor [ Mon Jan 12, 2015 10:55 am ]
Post subject:  Re: Behemoth for sale
The cabin will be 60 inches wide.....like my SUV! LOL.
I wanted to do something comfy.
Same garage will house the build.
Mast can be always disconnected :wol2 :wol2 :wol2
Author:  MadMuz [ Mon Jan 12, 2015 11:09 am ]
Post subject:  Re: Behemoth for sale
As long as it has cup holders, air conditioning and an ash tray, it will be perfect :like :laughing :laughing :pop
Author:  GordonT [ Mon Jan 12, 2015 11:25 am ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
SOLD!!!!!!!


Sad to see it go, although knowing what is coming will be so much better is exiting!!!

Gabor wrote:
Yes. Florida


Glad it will still be relatively close!!

:wol
Author:  Animal [ Mon Jan 12, 2015 11:58 am ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
The cabin will be 60 inches wide.....like my SUV! LOL.
I wanted to do something comfy.
Same garage will house the build.
Mast can be always disconnected :wol2 :wol2 :wol2
Ok cool, I should have a shop built soon, will be 8'11" looks like we are going to just get to 9' shipping containers, this county is crazy when it comes to getting building permits.
Author:  elwood [ Mon Jan 12, 2015 12:01 pm ]
Post subject:  Re: Behemoth for sale
60 inches wide!!!? You could put Muz And Gabor in there!!
Will it have wi-fi? Cup holders sure would be nice in Barry's Cavalon....
When He flew it here he had like a McDonald's bag, dunkin donuts coffee cup, little debbie wrappers in the empty seat just as if it were his car, lol!
Author:  MadMuz [ Mon Jan 12, 2015 12:29 pm ]
Post subject:  Re: Behemoth for sale
Only 60" wide? I suppose I could squeeze all of my rolls of fat over the back somewhere :laughing :laughing

Wi-Fi.... I never thought of that..... can hover over Maccas and connect to theirs :noidea :like :laughing :laughing
Author:  Gabor [ Mon Jan 12, 2015 12:30 pm ]
Post subject:  Re: Behemoth for sale
Gyros don't hover you dummy!
:rofl :boink :drum
Author:  MadMuz [ Mon Jan 12, 2015 12:32 pm ]
Post subject:  Re: Behemoth for sale
Gabor wrote:
Gyros don't hover you dummy!
:rofl :boink :drum


Ok, levitate then :noidea :pop :laughing :laughing
Author:  GyroGeorgia [ Mon Jan 12, 2015 12:44 pm ]
Post subject:  Re: Behemoth for sale
Animal wrote:
Gabor wrote:
SOLD!!!!!!!
I knew that would not take long. is it staying local?


Good going Gabor!

Thoroughly understand what you are doing... and agree!

Now on to the build thread (as time allows).

:wol
Author:  Gabor [ Mon Jan 12, 2015 12:48 pm ]
Post subject:  Re: Behemoth for sale
I truly did not anticipate this quick and this heavy interest!!!
I love it don't get me wrong. I just was a little taken back by it.
Stan told me once that it would sell quickly if I ever decided to do so.
He was right again :) :Wolvie
Author:  RotoPlane [ Mon Jan 12, 2015 1:29 pm ]
Post subject:  Re: Behemoth for sale
I think we all knew that fine machine would sell quickly.
Congratulations Gabi, I'm happy for you.....I guess......some books I don't relish closing ;).
Page 3 of 6 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/